扩散方程单内点精细积分法与差分法比较研究

一维扩散方程初值问题可以用全域或子域精细积分求解。子域积分可以采用不同数量的内点，单内点是其最简单的情况。当单内点精细积分中的传递函数即指数函数用其泰勒展开式的一阶近似来替代时，精细积分转化为差分方程。本文研究了这一对应关系。各种常见差分格式均找到了对应的单点精细积分格式，并在单点精细积分一般公式中得到了统一表达形式     

Raman spectral probe on increased local vibrational modes and phonon lifetimes in Ho3+‐doped Bi2O3 micro‐rods

We report the appearance and enhancement in intensity of impurity related local vibrational modes in Bi₂O₃ : Ho micro‐rods along with normal modes. Pure and Ho‐doped Bi₂O₃ micro‐rods were synthesized by conventional co‐precipitation method at 60 °C. The structural and morphological studies were carried out using powder X‐ray diffraction technique and scanning electron microscopy, respectively. Raman spectroscopic studies reveal the existence of local phonon vibrational modes (LVM) due to the incorporation of Ho³⁺. Harmonic approximation method was employed to find the dopant‐related peak in the Raman spectra. Variation in full width at half maximum for LVM with increase in Ho³⁺ was also investigated. This increase in FWHM indicates the decrease in crystallinity of the doped samples. The phonon lifetime calculation carried out for each samples and the decrease in phonon lifetime with doping concentration make this material a potential candidate for optical and electronic applications. Copyright © 2016 John Wiley & Sons, Ltd.     

关于一类电-力振动模型的建模与分析

从电学、力学的基本原理出发,通过数学方法建立和分析了一种电-力振动模型。这是一种较复杂的电力混合作用的线性振动系统,由模型的特殊结构(类扬声器结构)作者确立了两种磁场,即感生磁场和外磁场两者正交独立,并规定了电学、力学两种不同物理量的坐标取向关系。该模型需要求得三阶正系数常微分方程的收敛解,再求得包含暂态、稳态项的完整解。另外,文章从能量和做功的角度,通过对电压电流间的相位差分析,对所建模型的正确性作了论证,同时也为这类建模引荐了一种论证手段。     

用于旋转壳分析的广义样条子域法

本文以非等距Ｂ＿３样条函数为基函数分别建立了旋转壳子午向和环向形函数，其中环向形函数满足周期性条件。采取先子午向插值后环向插值的方式得到旋转壳广义样条子域位移模式。该模式可沿子午向与环向各结线任意设取结点，亦即不同环线可以有不同的结点数，从而大大提高了样条子域法的灵活性，拓宽了其应用范围。     

多晶薄膜X-射线衍射

作者在普通X-射线衍射仪上实施了样品倾斜X-射线衍射(STD)技术,不需要专用薄膜附件(TFA)也能很好地进行薄膜结构的测定,并且给出其衍射能量方程和方位角方程,从而使理论、实验和结构解析结合为一体。目前,应用该技术已经成功地解决了一些其它简便方法所无法解决的诸如物相纵向分布变化测量等问题。本文还通过几种摩擦学用膜的测定结果阐明了该技术的应用及功能。     

A NEW TWO-POINT ADAPTIVENONLINEAR APPROXIMATION METHOD FOR RELIABILITY ANALYSIS

I. INTRODUCTION Reliability analysis is becoming increasingly important in structural design. Over the years, manyresearchers have been involved in the evaluation of failure probability and many methods have beenpresented for structural reliability anal…     

涉及肌肉作用影响的髓内钉屈曲分析

在骨折的修复过程中，常发生髓内钉断骨内的情况。其主要原因是涉及肌肉影响后，髓内钉不是单钝的受压杆件，而是多种组合变形的屈曲问题。文中利用有限元法对目前较新结构的髓内钉在骨折治疗中涉及肌肉作用影响进行多方面的压、弯曲与扭转组合变形屈曲分析。得出了三叶瓣型髓内钉在涉及肌肉影响时的屈曲临界压力比单纯受压时髓内钉的屈曲临界压力小51％。并得出髓内钉只能额外承受15Nm左右的外来扭力。这些结果可供髓内钉进一步发展及临床应用参考。通过有限元的分析还可以对髓内钉受力状态的薄弱环节有一个全面的认识，为髓内钉合理设计、材料的选择等进行优化设计提供依据。     

Diffusion of moisture in deformable porous media. Anisotropic fibrous materials

This paper presents a study on the deformation of anisotropic fibrous porous media subjected to moistening by water in the liquid phase. The deformation of the medium is studied by applying the concept of effective stress. Given the structure of the medium, the displacement of the solid matrix is not taken into account with respect to the displacement of the liquid phase. The transport equations are derived from the model proposed by Narasimhan. The transport coefficients and the relation between the variation in apparent density and effective stress are obtained by test measurements. A numerical model has been established and applied for studying drip moistening of mineral wool samples capable or incapable of deformation.Nomenclature D mass diffusion coefficient [L²t^–1] - e void fraction - g gravity acceleration [Lt^–2] - J mass transfer density [ML^–2t^–1] - K hydraulic conductivity [Lt^–1] - K _s hydraulic conductivity of the solid phase [Lt^–1] - K ^* hydraulic conductivity of the deformable porous medium [Lt^–1] - P pressure of moistening liquid [ML^–1 t^–2] - S degree of saturation - t time [t] - V speed [Lt^–1] - X horizontal coordinate [L] - Z vertical coordinate measured from the bottom of porous medium [L] - z z-coordinate [L] Greek Letters porosity - ₁ total hydric potential [L] - _g gas density [ML^–3] - ₁ liquid density [ML^–3] - ₀ apparent density [ML^–3] - _s density of the solid phase [ML^–3] - density of the moist porous medium [ML^–3] - external load [ML^–1t^–2] - effective stress [ML^–1t^–2] - bishop's parameter - matrix potential or capillary suction [L] Indices g gas - 1 moistening liquid - p direction perpendicular to fiber planes - s solid matrix - t direction parallel to fiber planes - v pore Exponent * movement of solid particles taken into account     

Stress characterization of elastodynamics with continuously distributed defects

A pure stress formulation of linear nonhomogeneous anisotropic elastodynamics with continuously distributed defects (EcDD) is proposed, and well known solutions of ECDD corresponding to stationary and moving concentrated plastic fields in an infinite body are recovered by direct integration of the stress field equation. A new interpretation of the solutions is given.